cisco voip

News about cisco voip

When using PIM Sparse in NBMA environment like Frame Relay you need to make sure you enter the ip pim nbma command to disable the split horizon rule that traffic coming into the interface is not going out that same interface.

The IP pim nbma is working only for Sparse Mode Group

Candidate RP need to be able to communicate only with the mapping agent and the Routers in the Domain need to be able to communicate with the Mapping agent so from that we can understand that we need to watch our Route to the Mapping Agent.

Ok I think I will end it here for now, I hope this was good info.

Joe A: Introduction From The New Guy On The Block

Wed, 06 Aug 2008 05:07:37 +0000
Hello to everybody out there in the wonderful world of CCIE blogging.  Well, I thought I would take a little time to tell you a bit about myself before going off into technical ramblings.
Well, where do I begin?  I’m a 26 year old network engineer residing in the metro Detroit area.  Currently I’m working as ...]

Fall Back Bridging Tutorial

Tue, 08 Jul 2008 08:23:05 +0000
Bridging is an obscure topic in CCIE R&S study.
It can be divided in three types
1) IRB (Integrated Routing and Bridging)
2) CRB (Concurrent Routing and Bridging
3) Fall back bridging
IRB is discussed in Lab 3 of internetworkExpert labs.
Basically IRB and CRB are generally used on routers to bridging different VLAN domains. If IRB is used, we can ...]

This is the main reason why dietitians recommend to consume 60 percent of animal protein and 40 percent of vegetable analogue from the daily ration.


ccie questions
microsoft